|
Always shake well before using. |
|
Do Not Freeze |
|
Immediately replace cap on bottles after
use. |
|
Store opened and unopened product in a
dry, cool area. |
|
Do not store product in direct sunlight. |
|
Using the standard dosage several times
a week is more effective than using an
excessive amount in one treatment. |
|
Double check the pond volume when
determining dosage. Under dosing because
of incorrect volume will reduce the
effectiveness of the biological
treatment. Click here to
Auto Calculate
pond volume or gallons in your pond. |
|
UltraViolet light will affect the
performance of biological products.
Click here for more information on
Using UV lights
with UltraClear. |
|
Biological products are not as quick
acting as chemicals. It may take between
two and four weeks for the biological
product to work. See
Bacteria versus
Enzymes versus Chemical |
|
A partial improvement (such as browning
or algae sinking to the bottom) in the
clarity of the water is an indication
that the biological product is working,
but may not be a strong enough dosage.
In these cases, an increase in the
weekly dosage or going to a more
frequent dosing rate (ie, 2-3 times a
week) may be required. |
|
Fertilizers, run-off containing
fertilizers or pesticides and other
chemicals added to a pond will affect
the balance of the pond and the
performance of the biological product
used for treating the pond. |
|
Check your ph periodically. The pH of
the pond is a vital element that needs
to be controlled. Extreme pH will make
it difficult to bring the pond in
balance for successful treatment. |
|
Shallow ponds often require a stronger
dosage or more frequent treatment at the
standard dosage. |
